# Explore EDD regions

> Switch Explore to the Economic Development District overlay to see each district's business priorities, filter and search districts, and export them.

## Before you start

- EDD regions is an overlay inside **Explore**, not its own sidebar item. The
  **EDD regions** button is on the toolbar at **State** level; from a
  county's detail panel you reach the same overlay through **View
  district →**. See [Explore a location](https://kb.incenti.co/insights/explore-a-location.md) for how
  levels and the toolbar work.
- An Economic Development District (EDD) is an EDA-designated region — an
  area the U.S. Economic Development Administration has designated for
  coordinated economic development, usually spanning several counties. Each
  district publishes a Comprehensive Economic Development Strategy (CEDS)
  naming its priorities.
- Those strategies are coded into 16 fixed categories in Incenti's SLEDS
  dataset (State & Local Economic Development Strategies), so districts can
  be searched, filtered, and compared like any other metric. Where a
  district's strategy has not been coded, the product says **No SLEDS coding
  located**.
- Not every state has EDA-designated districts. Delaware, Rhode Island, and
  Wyoming organize economic development at the state level instead and have
  no EDD region on record.

## Steps

### Turn on the overlay

1. At **State** level, click **EDD regions** in the toolbar. This swaps the
   whole screen to the district view: 404 EDA-designated districts instead
   of states, each colored by its business priorities. Click **EDD regions**
   again to return to the state view exactly as you left it; nothing about
   your state search, filters, or selection is affected.

> **Note:** Turning the chip off and on again resets the EDD side of the screen — your
> district selection, EDD filters, and color-mode choice all start over. The
> state view underneath is untouched.

### Choose what the map colors by

2. Use the dropdown next to the search box to choose **Each region's top
   priority** (the default — every district colored by its single dominant
   category) or a specific category under **Emphasis on one category**,
   which shades every district from a low to a high share of that category's
   goals — the legend reads "Low" and "High" followed by the category name —
   and greys out any district with no goals in it. The legend at the bottom of the map always
   shows **No coding** (gray, for a district with no coded goals) and **No
   EDD designation (state-level)** (dashed amber, for Delaware, Rhode
   Island, and Wyoming). Clicking one of those three amber states clears
   your selection and shows **No EDA-designated Economic Development
   District is on record for that state.** in the right rail.

### Switch between Map, Table, and Split

3. Click **Map**, **Table**, or **Split**, same as any other Explore level.
   The table has two tabs:

   - **Scores** (the default) lists **District**, **State**, **EDA region**,
     **Counties**, **Coded**, and **Top priority**.
   - **Category shares** replaces those with a percentage column for each of
     the 16 business-priority categories.

   Sort on any column header. The default sort is **Coded**, highest first.

### Use the Top districts overlay

In Map and Split view, a **Top districts** box sits at the top right listing
five districts by name. In the default color mode it ranks districts by how
many coded goals they have; when you have chosen one category, it ranks by
that category's share instead. It follows your current filters, and clicking
an entry adds that district to your selection.

### Search for a district

4. Type into **Search EDDs…** to match a district by name, its two-letter
   state code, or the acronym of its name (for example "NCTCOG" for the
   North Central Texas Council of Governments). Search always checks every
   district, even while filters are narrowing the map or table, and returns
   up to 10 results (**No matches** when there are none). Pick a result to
   add it to your selection.

### Filter by priority or coverage

5. Click **Filters** to open the filter panel:

   - **Prioritizes** — check one or more of the 16 business-priority
     categories (Administration, Broadband, Business Climate, Business
     Development and Assistance, Business Finance, Community Support,
     Education, Entrepreneurial Development, Industry Cluster Development,
     Infrastructure & Project Development, International Trade and
     Investment, Manufacturing, Recovery & Resilience, Technology-Based
     Economic Development, Transportation Infrastructure, and Workforce
     Development). A district matches if any checked category is among its
     **top three** priorities — not merely present in its coding.
   - **Ranges** — sliders for **Counties served** and **Coded goals**.
   - **Reset** clears one metric's range, the **Reset** under
     **Prioritizes** clears that group, **Reset all** clears everything, and
     **Done** closes the panel.

   The toolbar carries a live match count — **8 of 404 districts match** —
   whether the panel is open or not, and districts that do not match fade on
   the map rather than disappearing.

### Select a district

6. Click a district on the map, or click its row in the table, to select it.
   Clicking a second, third, and so on district keeps adding to your
   selection instead of replacing it; click a selected district again to
   remove it, or click the **X** button in the toolbar to clear the whole
   selection. Hovering a district on the map previews it in the right-hand
   panel, which reverts to your last selected district when you move away.

   The panel shows:

   - A header with the district's name, headquarters city and state, and an
     **EDA … region** line — an EDA administrative region, not a geography —
     plus stat tiles for **Counties** and **Coded goals**.
   - **Business Priorities** — a bar per category the district has coded
     goals in, largest first.
   - **Goals & actions** — the district's coded goal, objective, and action
     item text, grouped by category (largest group first); each item shows
     its most specific text with a shorter parent goal underneath, marked
     **↳**. This section loads the first time you open a district's panel,
     showing **Loading goals…** and then **No goals available for this
     district.** if there are none.
   - **Benchmarks** — the district's **top five** categories by share of
     coded goals, each with a national percentile written as an ordinal
     (for example **87th**) and the category's national share (**nat. 12%**),
     so you can see whether a priority is unusually strong here or typical
     everywhere. The percentile pool is coded districts only; districts with
     no coding are not ranked against.
   - **Export** and **Report** buttons, plus **Compare N regions** once two
     or more districts are selected.

### Compare districts

7. Select two or more districts and click **Compare N regions** in the
   detail panel. That opens the full-screen comparison directly — there is
   no compact comparison tray for districts the way there is at State,
   Metro, County, and City level. Comparison caps at 5.

   The full comparison shows:

   - A card per district with its name, a **N counties · ST** line, and its coded
     goal count as the headline number.
   - **Coverage** rows for **Counties served** and **Coded items**.
   - A share breakdown across all 16 categories, best value in green, with a
     **▲** marker on any other district whose share in that category is at
     least 1.5 times the national average (hover it for the multiple).
   - A **Best fit by project type** summary scoring each district against
     six project types — Advanced manufacturing, Technology & R\&D, Logistics
     & distribution, Workforce-intensive operations, Rural &
     broadband-dependent, and Trade & export — by adding up its shares in
     that type's signal categories.
   - A narrative insight banner.

   Removing districts until only one is left exits the comparison and returns
   you to the overlay.

### Export

8. Select one or more districts, then click **Export** (in the toolbar,
   the grid, or the detail panel) to download a CSV — up to 10 districts at a
   time. The detail panel's button exports whichever district's panel is
   open, ticked or not. The file has two sections: a per-district summary
   with a percentage column for every business-priority category, followed
   by a flat table of every exported district's individual goals,
   objectives, and action items. A single-district export is named after
   that district (for example
   `sleds-tx-north-central-texas-council-of-governments.csv`); a
   multi-district export downloads as `sleds-edd-priorities.csv`. If the
   goal text cannot be fetched you will see **Couldn't load goals for the
   export — try again.** See
   [Export and CSV formats](https://kb.incenti.co/insights/export-and-csv-formats.md).

### Create a report

9. With a selection made, click **Create report** (toolbar) or **Report**
   (detail panel) to open a District Priorities report: one district
   produces a single-district report, two or more produce a comparative
   report. More than five selected quietly uses the first five. With nothing
   selected you get **Select a district — or tick two to five to compare —
   then create a report.** You can also start a District Priorities report
   directly from the Reports tab by searching for a district there. See
   [Create and export Insights reports](https://kb.incenti.co/insights/reports.md) for the Reports
   flow in general.

### Find the district for a state or county

10. Outside the overlay, a state's or county's own detail panel includes a
    **Regional priorities (EDD)** section. A county maps to exactly one
    district, so a county shows a single card; a state lists every district
    in it, ordered by coded goal count. Each card names the district, how
    many counties it serves, its top four categories, and a **View
    district →** link that jumps straight into the EDD overlay with that
    district selected and its panel open. A state with no districts reads
    **This state has no EDA Economic Development Districts — its economic
    development is organized at the state level.**

### Districts without a map shape

Seven of the 404 districts have no polygon on the map: the Puerto Rico
districts, and the Connecticut districts still keyed to the state's
pre-2022 counties while the boundary layer carries its planning regions.
They are fully present in search, the table, the detail panel, comparisons,
exports, and reports — they simply cannot be clicked on the map.

**For economic development organizations:**

Economic development organizations typically start from their own state or
county's **Regional priorities (EDD)** section to see how their district's
coded strategy is described, then check the Benchmarks section to see which
of those priorities are unusually strong nationally — useful language for a
grant application or an attraction pitch that needs to align with the
district's official CEDS goals.

**For site selectors:**

Site selectors typically turn on the overlay directly, filter to the
category a client's project needs (for example Workforce Development or
Infrastructure & Project Development), and screen candidate regions by
whether that category shows up among their coded priorities — a signal that
the region's own economic development strategy already supports the kind of
project being sited there.

## What happens next

- Turning the overlay off returns you to the state view exactly as you left
  it; your search, filters, and selection there were never touched. Turning
  it back on gives you a fresh EDD screen — district selection, filters, and
  color mode all reset.
- Goal and action-item text for a district loads the first time you open its
  panel or export it; it is not preloaded for every district up front.
- EDD selections, filters, and the color-mode choice are not written into
  the page URL, so reloading the page or sharing a link does not restore
  them.
- Switching geography level while the overlay is on turns the overlay off.

## Common questions

**Q: Where is the compact comparison panel for districts?**
A: There isn't one. At State, Metro, County, and City level a comparison
first appears as a panel in the right rail; for districts, **Compare N
regions** in the detail panel opens the full-screen comparison directly.

**Q: Why can't I see my district on the map even though it's in the list?**
A: Seven districts have no map shape — those in Puerto Rico, and the
Connecticut districts still keyed to the state's pre-2022 counties. They
appear in search, the table, the detail panel, comparisons, exports, and
reports; they just cannot be clicked on the map.

**Q: Why are Delaware, Rhode Island, and Wyoming striped amber?**
A: Those three states have no EDA-designated Economic Development District
at all — they organize economic development at the state level. Clicking one
shows a note saying so instead of a district panel.

**Q: Why does the Prioritizes filter miss a district I know has Broadband
goals?**
A: **Prioritizes** matches a district's **top three** categories only. A
district with a small share of Broadband goals will not match even though
those goals exist. Use the **Category shares** table tab, or the map's
category color mode, to find every district with any share in a category.

**Q: What does the ▲ next to a percentage in the comparison mean?**
A: That district's share of coded goals in that category is at least 1.5
times the national share — a genuinely distinctive emphasis rather than a
marginally higher number. Hover it to see the exact multiple.

**Q: What does the national percentile on a priority mean?**
A: It ranks that district's **share** of coded goals in that category
against every other district that has coding. It is not a rank of the
district itself, and districts with no coded goals are not in the pool.

**Q: What does "EDA Austin region" mean — is that a geography?**
A: No. It is the EDA administrative region the district reports into, not a
place you can look up in Explore.

**Q: Why does my county not show up in an EDD?**
A: Every county maps to at most one district through a county-to-district
crosswalk. If your county's state is one of the three with no EDA-designated
district (Delaware, Rhode Island, or Wyoming), there's no district to map
to. If your state does have districts but your specific county still shows
no match, check the county's own **Regional priorities (EDD)** section,
which states plainly when no district maps to it rather than guessing.
Connecticut counties are the most common case, because the state's
geography changed in 2022.

**Q: Why do some districts have no priorities listed?**
A: A district shows "No SLEDS coding located" when its Comprehensive
Economic Development Strategy hasn't been coded into the 16 priority
categories yet. It still appears on the map and in search — colored gray for
"No coding" — but has nothing to show in Business Priorities, Goals &
actions, or Benchmarks until that coding is added.

**Q: Where does the district data come from and how old is it?**
A: It comes from Incenti's SLEDS dataset, built by reading each district's
published Comprehensive Economic Development Strategy and coding its goals,
objectives, and action items into the 16 categories. It is refreshed when a
new dataset is loaded rather than on a monthly schedule, and the product
does not display a vintage per district. See
[Where Insights data comes from and how often it refreshes](https://kb.incenti.co/insights/data-sources-and-refresh.md).

**Q: Can I open the district's full CEDS document from here?**
A: No. The overlay shows the coded goals, objectives, and action items
rather than linking out to the source plan.

**Q: Why did my EDD filters reset when I turned the chip off and on?**
A: The overlay is rebuilt each time you turn it on, so its selection,
filters, and color mode start fresh. Your state-level search, filters, and
selection underneath are preserved.

**Q: Can I export the district list?**
A: Yes. Select up to 10 districts and click **Export** anywhere it appears
(toolbar, grid, or detail panel) to download a CSV with a per-district
summary and every exported district's individual goals and action items.

**Q: I want to compare a state with an EDD, or an EDD with a county. Can I?**
A: No. Comparison only works within one geography level or overlay at a
time — you can compare EDD districts with other EDD districts, but not
across the EDD overlay and the state or county view. Use a state or
county's **Regional priorities (EDD)** section to see the connection between
a geography and its district without leaving that level.

## Related

- [Explore a location](https://kb.incenti.co/insights/explore-a-location.md)
- [Compare locations](https://kb.incenti.co/insights/compare-locations.md)
- [Insights overview and data coverage](https://kb.incenti.co/insights/overview-and-data-coverage.md)
- [Export and CSV formats](https://kb.incenti.co/insights/export-and-csv-formats.md)
- [Where Insights data comes from and how often it refreshes](https://kb.incenti.co/insights/data-sources-and-refresh.md)
- [Create and export Insights reports](https://kb.incenti.co/insights/reports.md)
- [Ask Insights](https://kb.incenti.co/insights/ask-insights.md)
