# Explore a location

> Browse states, metros, counties, and cities on the map or table, filter by any metric, view a location's details, and export or start a report.

## Before you start

- **Explore** is one of the sidebar areas inside Insights; open it from the
  sidebar or by going to `/insights`, which lands there by default.
- Explore works at four geography levels: **State**, **Metro**, **County**,
  and **City**. Switch levels with the buttons at the left of the toolbar.
  Each level has its own view mode, search, filters, and metric dropdown.
- The right-hand detail panel and the **TOP 5** card are hidden on narrow
  screens. Use a laptop-width window to read a location's details.

## Steps

### Choose a level

1. Click **State**, **Metro**, **County**, or **City** in the toolbar. The
   map, table, metric list, and filters all change to match the level you
   picked. County and City load their data the first time you enter them, so
   expect **Loading county geography…** or **Loading city data…** briefly.

_Screenshot: The Explore toolbar: State, Metro, County, City level buttons, the Search box, and the Map, Table, Split view mode buttons._

### Pick what the map or table colors by

Next to the view mode buttons is a metric dropdown. It sets which metric
colors the map and which metric the **TOP 5** list ranks by, at every level
that has one. **Composite Score** blends every category into one 0–100
number; **Cost Score**, **Workforce Score**, **Risk Score**, **Quality of
Life Score**, and **Regulatory Score** are the same blend limited to one
category.

What the dropdown offers differs by level:

| Level  | Dropdown contents                                               |
| ------ | --------------------------------------------------------------- |
| State  | The 6 scores plus 12 metrics — not the full state catalogue     |
| Metro  | The 6 scores plus **Population**, and only in Map or Split view |
| County | The 6 scores plus all 24 county metrics                         |
| City   | The 14 city indicators, no scores; labelled **Color by metric** |

If a metric you want is not in the State dropdown — natural gas price,
workers' comp, physicians, violent crime and others are not — read it from
the detail panel or the table instead.

### Switch between Map, Table, and Split

2. Click **Map**, **Table**, or **Split** to change the layout.
   - **Map** shows every location as a choropleth (State, County) or a
     bubble (Metro, City, sized by population and colored by the selected
     metric).
   - **Table** replaces the map with a sortable list.
   - **Split** shows the map on top and the table below at the same time.

In **Split** view at Metro, County, and City level, the table narrows to
your selection as soon as you select anything — the report and export follow
that same list. **Table** view always shows the full filtered set. State's
Split view shows the full set either way.

### Read the map

- The legend sits at the bottom left, running **Low** to **High** with the
  metric's name. For a metric where a lower value is better — unemployment,
  electricity rate, tax climate rank, disaster count, crime — the color ramp
  is reversed so that good always reads the same way. **Right-to-Work**
  colors green for yes and grey for no.
- Hovering a location shows a dark tooltip with its name, state,
  population, and the selected metric's value.
- County, Metro, and City maps have **Zoom in**, **Zoom out**, and **Reset
  view** buttons at the top right, and show the current zoom while you are
  zoomed in. The State map has no zoom.
- At County level, filtering or searching fades the non-matching counties
  rather than removing them; selecting a county fades everything else.
- The Metro map draws each metro as a bubble (**Bubble size = population ·
  color = …**) and outlines a metro's boundary once you select it.
- The City map draws at most 2,000 markers at a time, so small places
  disappear when you zoom out and return as you zoom in. See
  [City-level data](https://kb.incenti.co/insights/city-level-data.md).

### Read the table

- The footer shows a count like **50 states · 2 selected**, then **Showing
  1–50 of 3,143** and **Page X of Y**. Pages hold 50 rows.
- A `#` column numbers the rows in the current sort. Click any column
  header to sort by it; the first click sorts **descending**, a second click
  flips it.
- Tabs above the table swap which metric group's columns are shown:
  **Scores**, **Workforce**, **Cost**, **Risk**, **Quality of Life**, and
  **Regulatory**. At Metro level the last tab reads **Regulatory (State)**.
  At EDD level the tabs are **Scores** and **Category shares**. City's table
  has no tabs — it shows City, Population, the active indicator, Median HH
  Income, and Median Home Value.
- With no matches the table reads **No states match the current filters.**
  (naming the current level's noun).
- The Metro table is different: no pages and no `#` column, and clicking a
  row **expands an inline detail row** underneath it showing all five
  categories with the source name under each metric. The checkbox at the
  start of the row is what selects a metro.

_Screenshot: The Table view: Scores, Workforce, Cost, Risk, Quality of Life, and Regulatory tabs above a sortable table of locations with pagination controls at the bottom._

### Search for a location

3. Type into the search box. The rules differ by level:
   - **Search states...** matches on name.
   - **Search metros...** filters the table and map in place as you type,
     matching name, short code, or state. There is no result list and
     nothing is selected for you.
   - **Search counties or cities...** needs two or more characters and
     matches a county name, "Name, ST", a state code, a FIPS code, or one of
     a curated list of about 70 well-known city names — so "Lexington" finds
     Fayette County, but a city that is not on that list will not find its
     county. Up to 10 results, largest first.
   - **Search cities…** needs two or more characters and returns up to 8
     places by population, including census-designated places even when
     **Incorporated only** is ticked. No match reads **No matches**.
   - **Search EDDs…** matches a district name, its state code, or the
     acronym of its name.

At State, County, City, and EDD level, picking a result selects that
location and clears the box.

### Filter by metric

4. Click **Filters** to open the filter panel. Each metric gets a slider with
   a mini histogram of the current level's values; drag either handle to set
   a range, or click **Reset** to clear one metric. Hovering a histogram bar
   shows how many locations fall in that bin. The panel is grouped
   under the same category headings as the data (Composite Scores, Cost
   Modeling, Workforce, Risk Assessment, Quality of Life, Regulatory &
   Policy). The bottom of the panel shows a live count, for example "8 of 50
   states match." At State level the six Site Screening metrics — population,
   population growth, median age, median household income, poverty rate, and
   freight volume — have **no** sliders. City level's panel covers its 14
   indicators, and adds an **All states** dropdown to focus one state and an
   **Incorporated only** checkbox to exclude census-designated places. Metro
   level has no Filters button.

The **Filters** button turns colored and shows a count while any filter is
active. Press Escape, click outside the panel, or click the **X** to close
it; a panel-level **Reset** appears once at least one filter is set.

_Screenshot: The Filters panel open: category headings (Composite Scores, Cost Modeling, Workforce, Risk Assessment, Quality of Life, Regulatory & Policy) each with metric sliders, and a match count at the bottom._

### Select a location

5. How selection works depends on the level:
   - **State** and **County**: click the location on the map or its row in
     the table. Each click adds to the selection rather than replacing it;
     click a selected location again to remove it, or click the **X** in the
     toolbar to clear everything.
   - **Metro**: tick the checkbox on the row, or click the bubble on the map
     or an entry in **Top 5 Metros**. A row click expands the inline detail
     instead of selecting. Metro selection stops at 5 — further clicks are
     ignored with no message.
   - **City**: tick the checkbox in the table to add a city to the
     comparison. Clicking a row or a map marker opens that city's detail
     panel without selecting it.

A **N selected** badge appears in the toolbar once anything is selected.

### Hovering versus selecting

The detail panel follows your mouse. Hovering a state, county, or district
on the map temporarily shows that location's details, and the panel reverts
to your last **selected** location when you move away. With several
locations selected, the panel shows the one you clicked most recently.

If the panel keeps changing while you read it, move the pointer off the map
— it will settle on the last location you clicked.

### Read the detail panel

The right-hand panel fills in with the selected location's details:

- A header with its name and population. State also shows **Median Age**;
  County shows the state and any city alias; City shows the designation,
  county, a **CDP** pill where relevant, and a **Partial ACS coverage**
  badge where some indicators are withheld.
- **Layer Scores** bars for Cost, Workforce, Risk, Quality of Life, and
  Regulatory, and — at State and County level — a radar chart of the same
  five scores.
- An accordion of collapsible sections: **Overview**, **Insights**,
  **Benchmarks**, **SWAT Analysis**, and, at State and County level,
  **Regional priorities (EDD)**. Only **Overview** is open to begin with.

Not every level has all of this. The **Metro** panel is a reduced one —
header, **Layer Scores**, and **Metrics** by category, with no Overview,
Insights, Benchmarks, SWAT Analysis, or EDD section — and it only appears
when exactly one metro is ticked, with no hover preview. The **City** panel
is laid out differently again: **City metrics (ACS-native)**, **More
indicators**, **AI Analysis**, and **About this place**, plus a **Close**
button. See [City-level data](https://kb.incenti.co/insights/city-level-data.md).

_Screenshot: The right-hand detail panel for a selected location: header with score, Layer Scores bars, and the collapsible Overview, Insights, Benchmarks, and SWAT Analysis accordion._

### Overview, and the Incentive Environment block

**Overview** lists the location's metrics. At State level they are grouped
as Workforce & Demographics, Cost Factors, and Risk & Environment; at County
level all 24 metrics are grouped by the five data layers, with the metric
currently coloring the map highlighted.

Both State and County Overviews end with an **Incentive Environment** block
drawn from Incentive Intelligence:

- An **Incentive Competitiveness** score out of 100, with a **Limited
  disclosure** flag where the state discloses too little for the figure to
  be reliable.
- Tiles for **Total Value**, **Awards**, **Typical Award**, and
  **Large-Award %**, then the top four award categories by share.
- A **Programs Offered** block counting the state's verified programs, with
  **Coverage in progress** while the catalogue is still being built out.
- A footnote reading **Source: Incenti Subsidy Intelligence** and, where
  normalisation applies, the window it covers.

At County level the block carries the note **Incentive data is state-level;
figures reflect the entire state, not this county.** See
[Incentive Intelligence](https://kb.incenti.co/insights/incentive-intelligence.md).

### Insights, Benchmarks, and SWAT Analysis

- **Insights** is a set of short call-outs comparing the location with the
  national average — up to 4 cards at State level and up to 6 at County
  level, where the first card describes whichever metric is currently
  coloring the map.
- **Benchmarks** compares the location with everything else at its level. At
  State level it reads **Ranked #X of N states** and shows the six scores
  plus six key metrics, each with the national average, a rank pill, and a
  percentile. At County level it shows percentiles only — no rank — across
  17 rows.
- **SWAT Analysis** is a strengths, weaknesses, opportunities, and threats
  summary (a standard SWOT, despite the heading) with a **Strategic
  Trade-off** card comparing the Cost and Workforce scores. Empty quadrants
  read **None identified.**

Everything in these three sections is generated by fixed rules from the
numbers on the page — nothing here is written by an AI assistant. The exact
thresholds are in
[How Insights scores are calculated](https://kb.incenti.co/insights/how-scores-are-calculated.md).

### Use the TOP 5 list

The map view shows a **TOP 5** card — **Top 5 States**, **Top 5 Metros**, or
**Top 5 Counties** — ranked by whichever metric the dropdown is set to. If
you have a selection, the list ranks your selected locations; with nothing
selected, it ranks the whole filtered set. Click any entry to select that
location. City level has no TOP 5 list.

### EDD regions

At State level, click **EDD regions** to switch the whole screen to an
Economic Development District overlay: EDA-designated districts instead of
states, each with its own coded regional priorities and boundary. Turning
the chip off returns you to the state view exactly as you left it — but
switching geography level while the chip is on also turns it off. From a
county, use **View district →** in the **Regional priorities (EDD)** section
of its detail panel instead. See
[Explore EDD regions](https://kb.incenti.co/insights/edd-regions.md).

### Export

6. Select one or more locations, then click **Export** to download a CSV of
   your current selection. State, Metro, County, and EDD level cap at 10
   locations; City caps at 15 and its button stays disabled until you open
   or tick a city. Clicking Export with nothing selected shows a message
   naming the cap. The columns each file contains are in
   [Export and CSV formats](https://kb.incenti.co/insights/export-and-csv-formats.md).

### Create a report

7. With a selection made, click **Create report**. An overlay opens with a
   heading that names the report type and how many locations it covers. The
   type is set by the level you are on: **State Competitiveness Report**,
   **Metro Market Analysis**, **County Profile**, **City report**, or
   **District Priorities**. One location produces a profile report; two or
   more produce a comparative report. See
   [Create and export Insights reports](https://kb.incenti.co/insights/reports.md).

> **Note:** Opening the **Create report** overlay records an entry in your Reports
> history immediately — before you download anything and even if you close the
> overlay straight away. That is why a report you never finished can appear in
> the history.

### Compare

Selecting two or more locations also turns on a **Compare** button and a
compact comparison panel in the right-hand rail. See
[Compare locations](https://kb.incenti.co/insights/compare-locations.md) for how comparison works.

**For economic development organizations:**

Economic development organizations mostly select their own state, metro, or
county to check how it benchmarks nationally, then add competitor locations
to the same selection to compare on the spot. The **TOP 5** list and the
Benchmarks accordion section are usually the first things checked before
pulling a metric into a marketing deck or an attraction pitch.

**For site selectors:**

Site selectors mostly start from a shortlist of candidate locations for a
client's project, select every candidate at once, and lean on the
comparison panel and Filters to screen out locations that fail a hard
requirement (for example a minimum workforce score or a maximum electricity
rate) before narrowing further.

## What happens next

- At **State** level your selection is written into the page's URL as
  `?states=`, so a link you copy while states are selected reopens Explore
  with the same selection, it survives a reload, and it is still there when
  you come back to State level from another level. Metro, County, and City
  selections are not in the URL and do not survive either.
- Switching levels resets the view mode, search, filters, and selection for
  the level you are leaving, and turns the EDD chip off. Only the State
  selection in the URL persists.
- Filter, sort, and metric choices are per-session and reset on reload.
- Opening **Create report** adds a row to your Reports history straight
  away. Exporting a CSV records nothing.

## Common questions

**Q: The right panel keeps switching to a different location when I move my
mouse. How do I lock it?**
A: Hovering the map previews that location in the panel. Move the pointer
off the map and the panel goes back to the location you last clicked. With
several locations selected, the panel follows the most recently clicked one.

**Q: Why does a county show different metrics from a state?**
A: Each level has its own catalogue built from what publishers release at
that grain. County actually carries 24 metrics to a state's 20 scored ones,
but they are not the same 24 — natural gas price and health premiums are
state-only, while cost of living index is county-only. See
[Where Insights data comes from and how often it refreshes](https://kb.incenti.co/insights/data-sources-and-refresh.md).

**Q: How do I color the map by natural gas price or workers' comp?**
A: You cannot. The State map dropdown carries the six scores plus twelve
metrics; the rest of the catalogue is available in the detail panel and in
the table's category tabs but not as a map color. The Metro dropdown is
narrower still — six scores plus Population.

**Q: Why can't I filter states by population or median income?**
A: The six Site Screening metrics — population, population growth, median
age, median household income, poverty rate, and freight volume — have no
filter sliders at State level. Use the table's column sort instead, or work
at County level, where every metric has a slider.

**Q: In the metro table, clicking a row expands it instead of opening the
side panel. How do I see the side panel?**
A: Tick exactly one metro's checkbox. The Metro side panel only appears when
a single metro is ticked, and a row click is reserved for expanding the
inline detail row underneath it.

**Q: How do I see a metro's Benchmarks or SWAT Analysis?**
A: There aren't any. The Metro panel shows a header, Layer Scores, and
metrics by category only. For benchmarks and a SWOT summary, look at the
metro's principal county or its state.

**Q: What is the "Incentive Environment" box in the Overview, and where do
those figures come from?**
A: It is a summary of the state's disclosed incentive awards from Incenti
Subsidy Intelligence — a competitiveness score, total and typical award
value, the largest categories, and a count of verified programs. It is
state-level even when you are looking at a county, and it says so.

**Q: What does "Limited disclosure" mean under Incentive Competitiveness?**
A: The state publishes too few awards, or too little value, for the
competitiveness figure to stand on its own. Read the score as indicative
rather than comparable when that flag is showing.

**Q: Why did the first click on a column sort it descending?**
A: That is deliberate — for scores and most metrics the highest values are
what you want first. Click the header again to flip to ascending.

**Q: Why does the Split-view table only show my selected counties?**
A: In **Split** view at Metro, County, and City level the table narrows to
your selection, because the export and the report follow that same list.
Switch to **Table** view to see the full filtered set again.

**Q: I clicked Create report by accident. Why is it in my report history?**
A: The history entry is recorded the moment the overlay opens, not when you
download. Closing the overlay without downloading leaves the entry behind.

**Q: Can I save my filters or share a filtered view?**
A: Only State selections travel in the URL. Filters, sorts, and view modes
are not saved or shareable — share a report or a CSV export instead.

**Q: Can I send a colleague a link to what I'm looking at?**
A: At State level, yes: your selected states are part of the page URL, so
copying the address bar shares the same selection. Metro, County, and City
selections are not in the URL, so share a report or an export for those
instead.

## Related

- [Insights overview and data coverage](https://kb.incenti.co/insights/overview-and-data-coverage.md)
- [Compare locations](https://kb.incenti.co/insights/compare-locations.md)
- [Explore EDD regions](https://kb.incenti.co/insights/edd-regions.md)
- [City-level data](https://kb.incenti.co/insights/city-level-data.md)
- [Export and CSV formats](https://kb.incenti.co/insights/export-and-csv-formats.md)
- [How Insights scores are calculated](https://kb.incenti.co/insights/how-scores-are-calculated.md)
- [Create and export Insights reports](https://kb.incenti.co/insights/reports.md)
- [Ask Insights](https://kb.incenti.co/insights/ask-insights.md)
- [Incentive Intelligence](https://kb.incenti.co/insights/incentive-intelligence.md)
