# Build a Fiscal Impact Analysis report

> Enter tax rates, property values, and spending assumptions in a Fiscal Impact Analysis report to estimate new annual property and sales tax.

## Before you start

- You need a report of type **Fiscal Impact Analysis** (see
  [Create and manage reports](https://kb.incenti.co/reports/create-and-manage-reports.md)).
- Have ready: local tax rates for the property (city, county, school,
  state, or however your jurisdiction breaks them out); current fair
  market value and planned renovation/construction for the current,
  commercial/retail, and residential scenarios; new housing unit count and
  median household income; local consumer spending figures and the local
  option sales tax rate; and square footage plus expected sales per square
  foot for any retail categories in the project.

## Steps

The cards run down the page in this order. There's no Save button — the
report auto-saves about a second after you stop typing, and the Timeline
card's Last Updated time moves to confirm it. See
[When the report actually saves](#when-the-report-actually-saves) below:
a few fields on their own aren't enough to trigger a save.

### Set the tax rates

1. In **Property Tax Rates Configuration**, enter a **Tax Name** and
   **Rate (%)** for each jurisdiction, then click **Add Tax** — one entry
   per jurisdiction (for example, city, county, school, state). Edit or
   remove a row with the trash icon. The footer shows the **Combined Tax
   Rate**, the sum of every rate entered.

   _Screenshot: The Property Tax Rates Configuration card with the Tax Name and Rate fields, the Add Tax button, three jurisdiction rows, and the Combined Tax Rate footer._

### Enter the project costs

2. In **Estimated Project Costs (Proposed)**, fill in **Current Fair Market
   Value ($)** and **Renovation/Construction ($)** for each of the three
   blocks: **Current Property**, **Commercial/Retail Property**, and
   **Residential Property**. Each block shows a read-only **Annual Tax**
   that updates as you type.
3. The **Property Tax Comparison** table below lines up the **Current**,
   **Commercial/Retail**, and **Residential** columns: Fair Market Value,
   Renovation/Construction, one row per tax you configured, and a bolded
   **Annual Property Tax** total for each column.

   _Screenshot: The Property Tax Comparison table with Current, Commercial, and Residential columns showing fair market value, renovation, each tax line, and the Annual Property Tax total._

### Estimate household income and spend

4. In **Estimated New Household Income**, enter the **Number of New Units**
   and **Median Household Income ($)**. Once both are filled in, the card
   shows **Median Household Income** and **New Household to Market (80%)**
   — the units expected to be occupied.
5. In **Estimated Household Spend**, enter **Consumer Spending Report
   (excludes groceries) ($)** and **Local Option Sales Taxes (%)**. With the
   new-unit count also filled in, the card shows **New Annual Sales
   Projection** and **New Annual Local Sales Tax Projection**.

### Estimate sales per square foot

6. In **Estimated Sales Per SF in the Project**, enter a **Category**,
   **SF**, and **Sales/SF\*** for each retail or commercial use, then click
   **Add Entry**. Each row shows its own **New Taxable Sales**; remove a row
   with the trash icon. The card totals to a **New Annual Sales Projection
   Total** and a **New Annual Local Sales Tax Projection**.

### Read the fiscal impact summary

7. Once there's enough data, an **Estimated Annual Fiscal Impact Summary**
   card appears, showing **New Annual Local Sales Tax**, **New Annual
   Property Tax**, and a highlighted **Estimated Annual Total New Fiscal
   Impact/Collections** figure.

   _Screenshot: The Estimated Annual Fiscal Impact Summary card showing New Annual Local Sales Tax, New Annual Property Tax, and the highlighted Estimated Annual Total New Fiscal Impact/Collections figure._

### How the numbers are calculated

- **Annual tax for a property block** = (Fair Market Value + Renovation/
  Construction) × Combined Tax Rate; each tax row is that total × just that
  jurisdiction's rate.
- **New Household to Market** = Number of New Units × 80%, rounded down.
- **New Annual Sales** (household spend) = New Household to Market ×
  Consumer Spending Report; its sales tax = that × Local Option Sales Taxes.
- **Taxable sales for a Sales Per SF row** = SF × Sales/SF; the total across
  entries is taxed at the same rate.
- **New Annual Local Sales Tax** (summary) = household-spend sales tax +
  Sales Per SF sales tax.
- **New Annual Property Tax** (summary) = Commercial/Retail annual tax +
  Residential annual tax − Current annual tax, so it's often lower than the
  commercial and residential taxes simply added — the existing tax is
  subtracted out.
- **Estimated Annual Total New Fiscal Impact/Collections** = New Annual
  Local Sales Tax + New Annual Property Tax.

### When the report actually saves

Autosave only runs once the report holds something worth saving. At least
one of these has to be true:

- a tax rate above 0 in **Property Tax Rates Configuration**, or
- a project-cost block (Current, Commercial/Retail, or Residential) with a
  total above 0, or
- at least one row in **Estimated Sales Per SF in the Project**, or
- both **Number of New Units** and **Median Household Income ($)** filled
  in with values above 0.

Until one of those holds, nothing is written — so typing only the two
**Estimated Household Spend** figures, or adding a tax row at rate 0,
saves nothing and the report reopens empty. Add a tax rate or a project
cost first and the rest of the page starts saving with it.

Two other things worth knowing while you fill the page in: the
**Estimated New Household Income** card only shows its computed rows once
**both** its fields are filled, and the three property scenarios (Current,
Commercial/Retail, Residential) are fixed — you can't add a fourth.

## What happens next

Changes auto-save about a second after you stop typing — there's no Save
button — provided the report holds enough data to save (see above).
Publishing the report (its first export) locks every field on this page, so
check the figures before you export. See
[Publish and export a report](https://kb.incenti.co/reports/publish-and-export-a-report.md).

## Common questions

**Q: Why is New Annual Property Tax lower than the Commercial and
Residential annual tax added together?**
A: The summary subtracts the property's Current annual tax: New Annual
Property Tax = Commercial annual tax + Residential annual tax − Current
annual tax. That isolates the _new_ tax the redevelopment creates, not the
full commercial and residential totals.

**Q: The summary card is not showing up.**
A: The **Estimated Annual Fiscal Impact Summary** card appears only once
there's enough data — values in **Estimated Project Costs**, both
**Estimated Household Spend** fields, or a row in **Estimated Sales Per SF
in the Project**.

**Q: Can I add a tax abatement or a phase-in period?**
A: Not as a separate field. To model a reduced or phased-in rate, lower
the **Rate (%)** for that jurisdiction in **Property Tax Rates
Configuration** to the effective rate during the abatement, then raise it
again once the abatement ends.

**Q: Why didn't my Estimated Household Spend numbers save?**
A: Those two fields alone don't start the autosave. Add a tax rate above 0,
a project cost, a Sales Per SF row, or both new-household fields, and the
whole page — including the household spend figures — saves together.

**Q: What is "Transaction Basis Adjustment" in the CSV?**
A: It's the exported label for what the page calls **Current Fair Market
Value ($)** — same number, different name. The CSV also prints a
**Total Project Cost** row per scenario that the on-screen table doesn't
show. See [What's in an exported file](https://kb.incenti.co/reports/export-file-contents.md) for the
whole list.

**Q: Can I add more than three property scenarios?**
A: No. The report compares exactly three — Current, Commercial/Retail, and
Residential. To model a fourth, create a second Fiscal Impact Analysis
report.

## Related

- [Create and manage reports](https://kb.incenti.co/reports/create-and-manage-reports.md)
- [Publish and export a report](https://kb.incenti.co/reports/publish-and-export-a-report.md)
- [What's in an exported file](https://kb.incenti.co/reports/export-file-contents.md)
- [Build an Economic Impact report](https://kb.incenti.co/reports/economic-impact-report.md)
- [Build a Loan Amortization Breakdown report](https://kb.incenti.co/reports/loan-amortization-report.md)
